From Rivalug Wiki

• http://alex.hrck.net/?p=64

• http://www.tolaris.com/2010/09/01/openwrt-10-03-on-buffalo-wzr-hp-g300nh/

• http://www.dd-wrt.com/wiki/index.php/Hard_reset_or_30/30/30

Contents 1 Installation 1.1 tftp 2 Networking 3 Configuration 4 xWrt

Installation

• Identify the hardware your device contains by looking at documentation: http://wiki.openwrt.org/toh/start and http://wiki.openwrt.org/oldwiki/oldtableofhardware
• Example: WRT54G v2.x uses Broadcom 4712
• find images that are associated with that hardware type here:

Installing on WRT54G v2.x

• http://wiki.openwrt.org/doc/howto/beginner
• http://wiki.openwrt.org/doc/howto/basic.config
• http://downloads.openwrt.org/backfire/10.03/brcm47xx/

tftp

• http://wiki.openwrt.org/doc/howto/tftp

Networking

Bridge wired and wireless into one vlan:

• http://wiki.openwrt.org/doc/recipes/bridgedap

Configuration

Install and configure ntp:

• http://wiki.openwrt.org/doc/uci/ntpclient

opkg install ntpclient
vi /etc/config/ntpclient

Time zone

• http://wiki.openwrt.org/doc/uci/system

vi /etc/config/system

Send logs to remote syslog server:

• http://wiki.openwrt.org/doc/uci/system
• https://forum.openwrt.org/viewtopic.php?id=11912

vi /etc/config/system

boot_wait

xWrt

• http://wiki.x-wrt.org/index.php/Backfire_Installation